Napier's SARA Technology RemovAll (a patented eco friendly coating removal, paint stripping solution) is a system that consists of biodegradable, non-toxic, virtually odorless, non-irritating and cost effective products that were designed to revolutionize the chemical paint & coating stripper process.  What stands at the forefront of SARA Technology products is the substitution for traditional, hazardous strippers.  These products were designed for both the safety of you and of the environment.


...patented eco friendly coating removal, paint stripping system...


Products based on SARA (Selective Adhesion Release Agent) Technology work in a completely different way compared to conventional strippers.  Unique ingredients in these products open up the pores in the coating system and travel through those pores until they reach the substrate.  This process induces physical stress in the coating, which destabilizes the adhesive bond between the coating and the substrate.  The coating lifts slightly and the vacuum created at the interface is quickly filled by oxygen gas released from the product.  The resulting explosive change in pressure destroys the remaining adhesion.  Lifting in large pieces, the coating can be scraped off or washed off with water, leaving the substrate prepared and ready for the new coating.
 


Product Features

 

Benefits

  • 100% biodegradable.

  • Virtually odorless.

  • Non-toxic, non-irritating formulation.

  • Non-flammable.

  • Free from any methylene chloride or caustics.

  • Extremely low VOC's (volatile organic compounds) well below the norms laid out even by the State of California.

  • No hazardous air pollutants or toxic air pollutants.

  • Rinse water is safe for public drainage system.

  • Water-based.

  • Easy to apply.

  • Non-carcinogenic.

  • Safe for air transportation.

 

RemovAll 210

for metal & concrete
based on SARA Technology

 

 

RemovAll 310

for wood, masonry & brick
based on SARA Technology

 

Sara Technology application procedures

  • Lifts coatings off in sheets or large chips. 

  • Removes several layers of coatings with only one application.

  • Engineered to stay wet much longer than conventional strippers.

  • Material consumption (volume of chemical ) is reduced by as much at 50% compared to conventional strippers.

  • Other work can continue while harmless inoffensive stripper is working.

  • Extremely effective against all kinds of coatings including high performance epoxies, urethanes and enamels.

Back to Top